Ultra thin x-treme diamond disc

SPECIFICATIONS:
Diamond disc, 1.2 mm ultra-fine segment for extremely hard materials, aimed at professionals.

Benefits:
• High performance.
• The ultra-fine segment provides optimal cutting quality both in speed and finishing, preventing the material from chipping and achieving faster and more precise cutting.
• The turbo segment enables optimal cooling and cutting from the start of the disc's life.
• High performance for working on porcelain.
• Emits less dust for the benefit of the operator.
• Generates less effort on the machine.

APPLICATIONS:
High-quality disc for ceramic materials: porcelain, stoneware, Ferrogres, tile, Klinker, firebrick, hard natural stone, slate and all types of construction materials including artificial stone and granite.

INSTRUCTIONS FOR USE:
• Check that the disc is correctly positioned in the machine: correct direction of rotation, clean and correctly adjusted clamping flanges.
• Let the machine idle for about a minute before cutting the first time and check the flatness of the disc.
• Always use with the correctly fitted machine protection casing, as well as the safety elements indicated on the disc: gloves, glasses, helmets, etc
• Do not use a flat disc for curved cuts.
• Verify that the revolution speed of the machine does not exceed the maximum allowed by the disc.
• Make sure you are using the correct disc for the material you intend to cut.
• The cut must be performed with the only weight of the machine, without exerting any pressure.