TRANSPARENT HIGH-TACK MS POLYMER

CHARACTERISTICS:
High quality MS polymer based clear adhesive with exceptional initial tack.

ADVANTAGES
Very high initial tack.
Fully transparent.
Easy application due to low viscosity.
No mechanical fasteners required during curing.
High final mechanical resistance.
Free of isocyanates, solvents, silicones.
Permanently elastic.
No shrinkage during curing.
Non-corrosive.
Almost odourless.
Good resistance to moisture.
No priming required on most substrates.
Fast curing.
Excellent adhesion on damp surfaces.

APPLICATIONS:
Ideal product for bonding most materials used in construction such as concrete, stone, plaster, PVC, polyurethane, hard plastics, ceramics, tiles, copper, aluminum, metals, fiber cement, tiles, marble, wood, varnishes and paints, etc.
They have a multitude of applications in automobiles, heavy vehicles, construction, metal carpentry, wood, hotels, marble works, etc.

Usage limitations:
Due to its high hardness and resistance, the HIGH TACK product is ideal for gluing but NOT for sealing applications on facades, glazing, expansion joints, etc. or any situation where a product with high elasticity is required. It also does not contain fungicide for application in bathrooms, changing rooms and other humid areas.
For outdoor applications, avoid exposure to extreme temperatures and direct/intense solar radiation.

INSTRUCTIONS FOR USE:
Surfaces to be joined must be clean, free of dust and grease.
Apply the product preferably in parallel cords separated by 10-20 cm depending on the weight to be supported.
Press strongly the element to be bonded against the surface for 5-10 seconds.

TECHNICAL CHARACTERISTICS:
Colour: transparent
Contents: 290 ml
Total cure: 24-48 hours