Thread sealer 75ml

SPECIFICATIONS:
Anaerobic PTFE resin for assembling pipes and metal threaded fittings and joints. Stable and flexible product.
Vibration and shock resistant. Easy to disassemble, even after several years.

APPLICATIONS:
Ensures tightness to gas, water, fuels, lubricants and industrial liquids.
For sealing metal threads and hydraulic ducts.

INSTRUCTIONS FOR USE:
Both pipe and accessory must be dry, clean and free of rust, greases and dust.
Apply a bead at the end of the male item and screw it in.
Remove excess adhesive with a rag.
The items can be handled without affecting the curing after 20 to 40 minutes, depending on the clearance.
After one to three hours, they can be used in the installation, although the adhesive does not stop curing until after five to ten hours.

TECHNICAL SPECIFICATIONS:
Approved for gas (Australian Gas Association Approval Nº 5047) at a pressure of up to 1.050 kPa.
Approved for drinking water (as per the Ministry of Public Health circular 102/78).
Colour: White cream
Composition: Anaerobic PTFE methacrylate resin
Maximum clearance: 0.30 mm
Operating temperature: -55 ºC to + 150 ºC
Contents: 75 ml