polyurethane waterproofing paint

SPECIFICATIONS:
Liquid material based on a pure polyurethane elastomer. Being liquid it can be applied on any surface, achieving a continuous, elastic, weatherproof membrane with excellent adhesion. Easy to apply. High resistance to UV rays and extreme temperatures (does not lose its properties between -40 ºC and +80 ºC).

APPLICATIONS:
• Covers, terraces, balconies and roofs.
• Tanks and containers exposed to the weather.
• Bridge platforms and cements.
• Thin metal or fibre cement roofs.
• Asphalt and EPDM membranes.
• Bathrooms and wet areas.
• Pedestrian zones of car parks and stadiums.
• Buried walls.
• Once opened, it is recommended that the product be consumed in its entirety.

INSTRUCTIONS FOR USE:
One-component product that can be applied with a roller, brush and airless spray, without the need for a primer. It requires a smooth, clean, dry support, without residual moisture and as solid as possible. Rain before completely drying does not affect the quality of the membrane. Our product can be applied in a single layer that will leave a minimum thickness of 700 microns, saving time, effort and material.
Ready to use, DO NOT dilute.

TECHNICAL SPECIFICATIONS:
iscosity: 3000-5000 cps
Density: 1.3-1.4 g/cm 3
Repainting: After 24 hours
Touch dry: 6 hours
Durability: EOTA W2 (from 10 to 25 años)
Support temperature: -20 ºC to +60 ºC
Service temperature: -40 ºC to +80 ºC
Maximum slop for self-leveling: 5 %
Maximum elongation (+25 ºC): >600 %
Maximum elongation (-23 ºC): >450 %
EOTA TR-003 water tightness test: Waterproof
Coverage: From 1.5 to 2 kg/m 2 , applicable in 1, 2 or 3 coats. (obtaining a 1.4 mm membrane)