Polyurethane foam cleaner

FEATURES:
Removes uncured residues from nozzles, adapters, and surfaces. Ready-to-use aerosol. Contains solvents. Strong stripping power.

APPLICATIONS:
For cleaning polyurethane foam guns and aerosol valves. For removing uncured foam.

INSTRUCTIONS FOR USE:
To clean surfaces: Check surface compatibility. Apply the cleaner to a cloth or disposable paper and rub the surface. If necessary, it can be used with water and soap.
To clean nozzles: Insert the spray cleaner applicator into the end of the nozzle previously unscrewed from the foam. Gently press the dispenser to remove fresh foam residue. Let the product sit for one to two minutes. Repeat this process 2 to 3 times if necessary.
To clean the gun: Remove the foam can from the gun. Attach the nozzle to the cleaner container and clean the fresh foam inside the gun and the front nozzle. Screw the cleaner container onto the gun. Pull the trigger until the spray from the nozzle is completely clean, with no foam residue. Compatible with the FX3 SYSTEM.

TECHNICAL FEATURES:
Base: Acetone
Application temperature: +5 ºC to 30 ºC
Content: 500 ml