Cyanocrilate activator

CHARACTERISTICS:
It is an accelerator for the hardening of cyanoacrylate glue on surfaces porous and acidic.
Prevents absorption of low viscosity pigments in materials porous.
Helps fill holes, which shortens drying time.
Quick-drying grades are a mixture of flammable solvents.

APPLICATIONS:
It is used for the rapid drying of cyanoacrylates, depositing a correct balance of neutralizing ions on the surface, stimulating the attraction of glue and preparing the surfaces to be joined. It enhances the strength of the glue.
It is used as a “primer” or as a pre-hardening after joining, it dries immediately the portion of glue that protrudes from the joint.

HOW TO USE:
Make sure the surfaces to be glued are clean, dry and free from oils and fats.
The product is normally applied by hand by spraying to allow a “drizzle” that forms on the surface of the joint.

TECHNICAL FEATURES:
Color: Slightly off White/Amber
Drying speed: five times faster, usually < 10 seconds
Maximum operating temperature: -5°C to 25°C
Content: 200 ml
Store in a cool place out of direct sunlight.
Expiry 12 months at 20 ºC in closed packaging.