Battery tester with printer Wählen

SPECIFICATIONS:
Tester for batteries and electrical systems in 12V cars and motorcycles.
Fully graphic and intuitive interface on a large LCD screen.Touch buttons. Integrated printer.
Powered directly from the battery being analysed or from any other power source between 9V and 15V.
Protection against polarity reversal. If the clamps are not connected correctly the analyser will not turn on. No sparks are generated on connecting the device.
The battery does not need to be fully charged during the test. Consumes very little energy so you can repeat the analysis many times without risk of it being discharged.
The analysis of the electrical system takes no more than 8 seconds.
Tests a wide variety of batteries, WET, AGM, Flat, AGM Spiral, EFB, GEL, Ca.

Analysis of battery capacity:
Cars: CCA/SAE:100A ~ 2000A / EN: 100A ~ 2000A / CA/MCA:100A ~ 2000A /
IEC: 100A ~ 2000A / DIN: 100A ~ 2000A / JIS#: 100A ~ 2000A
Motorbikes: CCA/SAE: 40A ~ 600A / EN: 40A ~ 600A / CA/MCA: 40A ~ 600A / IEC: 40A ~ 600A / DIN: 40A ~ 600A / JIS#: 40A ~ 600A

It also performs tests on the car's electrical system:
Starting test. Tests the starting capacity of the battery and tells you if it will not be able to start with recommendations for changing or charging the battery when necessary.
Alternator test. It tests the alternator without consumption at 3000 rpm and with load at 2000 rpm. It also checks the waveform of the diodes, so it can analyse the state of the alternator.
Earthing test. Analyses the resistance condition of the earth circuit contacts connected to the motor or to the chassis from the battery terminal, indicating results and recommendations. It has an internal memory to store up to 70 test results and can be connected to the PC through included software that enables viewing, storing and printing the results. PC connection via USB cable.
Working temperature: between 0 ºC - 50 ºC